Windshield washer fluid problem

Discussion in 'General Motoring' started by David Smith, Apr 1, 2004.

  1. David Smith

    David Smith Guest

    The windshield washer fluid in my 1998 Civic will not work. I push the lever
    to dispense the fluid but nothing happens, just like the bottle is dry. Even
    after I filled it up, same thing...

    What usually causes this? It can't be too complicated...

    Thanks,
     
    David Smith, Apr 1, 2004
    #1
  2. Try using a needle to clean out the nozzles.
     
    Ernest Cassirer, Apr 1, 2004
    #2
  3. ========================

    Suggested checklist:

    1 Does the motor run? If not, fuse / connector problem. See Owner's
    Manual.
    2 Remove a hose (ahead of nozzle) and see if water squirts out.
    3 If not, suck on hose to be sure one-way valve isn't dried out (my
    Odyssey had that problem)
    4 You might have to apply vacuum (suck) for a minute or two if valve is
    dry. Once it gets wet, it's cured.

    'Curly'
     
    'Curly Q. Links', Apr 1, 2004
    #3
  4. David Smith

    electricked Guest

    And also make sure the there are no leaks in the hoses under the hood. Mine
    were bitten by a squirrel and they were leaking so no water reached the
    nozzles. I replaced the nozzles and everything went back to normal.

    --Viktor
     
    electricked, Apr 1, 2004
    #4
  5. David Smith

    electricked Guest

    Meant to say "replaced the hoses and everything went back to normal."

    --Viktor
     
    electricked, Apr 1, 2004
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.