Update 2000 CRV Check Engine light

Discussion in 'CR-V' started by Clyde, Dec 4, 2006.

  1. Clyde

    Clyde Guest

    My local Autozone store plugged into my computer and told me that the code
    was either P071 or P091. ( I didn't have a pen and am going from memory)

    He did say that the code ment "running too lean on bank one". He also
    recommended that I take it to Honda so they could use their analyzer since
    it will probably give them more specific information. "There are too many
    things that might cause this particular code to come up."

    The indicator was no longer lit after he pulled the code so maybe I am
    lucky and this was just a fluke.

    Thanks to all that replied to my original posting.
     
    Clyde, Dec 4, 2006
    #1
  2. Clyde

    Tegger Guest



    Incomplete code. Code is a letter and FOUR numbers.

    Possible correct codes:
    P0171 = Fuel system too lean
    P0172 = Fuel system too lean
    P0174 = Front bank (Bank 2) Fuel system too lean
    P0175 = Front bank (Bank 2) Fuel system too lean



    No such code description.




    He's right. There may even be enhanced codes ("P1xxx", "P2xxx", etc.)
    which AZ may not even be able to read.



    He cleared the light for you. If it doesn't come on again and there are
    no driveability problems, you're OK. If it does come on again, go to the
    dealer, not AZ.
     
    Tegger, Dec 4, 2006
    #2
  3. Clyde

    Clyde Guest

    Thank you very much vor your reply!!
     
    Clyde, Dec 4, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.