rm 1/2 shafts in 93 civic

Discussion in 'Civic' started by peter, Oct 20, 2005.

  1. peter

    peter Guest

    hi,

    i volunteered to swap the engine in a 93 civic fro a friend whose
    daughter decided to run the car w/o oil...anyway, i am not sure how to
    remove the 1/2 shafts, any hints? do the lower ball joints need to be
    split? i have never had good luck not damaging the boots, is giving the
    hub a few good whack to loosen it ok?

    thanks,
    peter
     
    peter, Oct 20, 2005
    #1
  2. peter

    jim beam Guest

    yes, split the joints. tegger's got a pic of the correct tool in the
    faq's. don't use a pickle fork - it'll wreck the boots.
     
    jim beam, Oct 21, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 96-00 Civic HX motor swap into a 91 Civic 2WD wagon?

  2. Comparison b/w Civic SI, Civic DX-G, Corolla, & Matrix?

  3. 2000 Civic Stereo in 1987 Civic

  4. Refurbished Half Shafts

  5. 93 civic skunk2 lowering springs can it fit 01 civic

  6. '95 Accord CV shafts

  7. 1991 Accord Balance Shafts Belt Tensioner

  8. does 1999 4 cylinder have balancer shafts

Loading...