Req: Programming Remote For Keyless Entry 2002 Honda Accord SE

Discussion in 'Accord' started by Eric Martin, Jun 30, 2004.

  1. Eric Martin

    Eric Martin Guest

    Hello,

    Does anyone know what sequences are required to program the remote for keyless entry on a 2002 Honda Accord SE???

    Thank You,

    Eric
     
    Eric Martin, Jun 30, 2004
    #1
  2. Eric Martin

    Bryan Brown Guest

    Transmitter Programming:

    1. Turn the Ignition Switch ON(II)
    2. Within 1-4sec, press the transmitter lock or unlock button with the transmitter aimed at the keyless receiver by the power window master switch
    3. Within 1-4sec, turn ignition OFF
    4. Within 1-4sec, turn the ignition switch ON(II)
    5. Within 1-4sec, press the transmitter lock or unlock button with the transmitter aimed at the keyless receiver by the power window master switch
    6. Within 1-4sec, turn ignition OFF
    7. Within 1-4sec, turn the ignition switch ON(II)
    8. Within 1-4sec, press the transmitter lock or unlock button with the transmitter aimed at the keyless receiver by the power window master switch
    9. Within 1-4sec, turn ignition OFF
    10. Within 1-4sec, turn the ignition switch ON(II)
    11. Within 1-4sec, press the transmitter lock or unlock button with the transmitter aimed at the keyless receiver by the power window master switch
    12. Confirm you can hear the sound of the door lock actuators. Within 1-4 sec., push the transmitter lock or unlock button again
    13. Within 10 sec, aim the transmitters(up to 2 additional ones) whose codes you want to store at the keyless receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each code is stored.
    14. Turn the ignition swithch OFF, and pull out the key
    15. Confirm proper operation of the transmitters.

    Personal Note: I am assuming the key in the ignition is one of your currently working keys and that the transmitter you are trying to program is the one you are pressing the buttons on.

    Technical Note: The computer can only store 3 transmitters. If you try and store a 4th, the 1st will be wiped out. This info came from the 2003 Honda Accord Service Manual.

    *EDIT*: Make sure you maintain the time intervals. Also, all doors, hood, and trunk must be closed when doing this procedure. EDIT


    Hello,

    Does anyone know what sequences are required to program the remote for keyless entry on a 2002 Honda Accord SE???

    Thank You,

    Eric
     
    Bryan Brown, Jun 30, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Keyless Entry Remote Reprogramming on 02 Accord

  2. Req. 2002 Honda Civic EX Keyless Remote Programming

  3. 95 Accord factory remote keyless entry problems.

  4. Are there any after-market security systems that can work with a honda keyless entry remote?

  5. Lost original key to Honda Odyssey with keyless entry remote starter

  6. '02 Accord Keyless Entry programming problem

Loading...