Replace Running light bulb.

Discussion in 'General Motoring' started by Shamus, Jan 19, 2026.

  1. Shamus

    Shamus New Member

    Joined:
    Jan 19, 2026
    Messages:
    2
    Likes Received:
    0
    Location:
    Dolores, CO
    Looking for advice on replacing the drivers side running light bulb on a 2012 Pilot. Unplug, turn (which way?) remove. Tools needed if any. etc.
     
    Shamus, Jan 19, 2026
    #1
  2. Shamus

    Shamus New Member

    Joined:
    Jan 19, 2026
    Messages:
    2
    Likes Received:
    0
    Location:
    Dolores, CO
    Did it. Locate back of bulb socket by feel. Turn socket 1/4 turn CCW, pull bulb out. There is a bulb retaining clip in socket, use small blade screw driver to remove bulb.
    Read caution on new bulb package, do not touch new bulb glass w/o clean gloves. Insert new bulb, 1/4 turn socket CW with wire exiting the socket at 6 o'clock. You can get to the socket to change the bulb from the top. Access is limited. Have to do the job by feel, can't see down. Is fairly easy.
     
    Shamus, Jan 19, 2026
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. To Replace Honda Accord 1993 Head Light Bulb

  2. 97 Civic - Replace Turn lsignal bulb

  3. Replace headlight bulb on 91 Acura Integra

  4. 98 Accord Sedan Low Beam Bulb - HB4 51 watt or 55 watt? How to Remove/Replace shroud?

  5. How do you replace headlight bulb in Honda US Wagon

  6. Replace bulb

  7. How to replace lower brake/tail light bulb on 2014 CRV

  8. how to replace fog light bulb on 2017 honda civic EXL

Loading...