PLEASE Help...00 Accord Serpentine Belt Tensioner R&R

Discussion in 'Accord' started by JW, Dec 3, 2007.

  1. JW

    JW Guest

    This is a 2000 Accord 3.0 V6 and I can't figure out how to remove the
    tensioner to replace the idler pully. I barely got the old pully off because
    there's not enough room for the bolt to come out all the way (hits the
    body/frame) so I have to remove the whole tensioner assembly somehow. Here's
    a pic of the assembly and it looks like there is only 2 bolts holding it on
    but, there's something else because it won't budge. I even tried to rotate
    it to see if it clocked into some sort of keyway or something. Thanks for
    any help.

    http://s140.photobucket.com/albums/r13/jweb47/Accord/?action=view&current=01.jpg
     
    JW, Dec 3, 2007
    #1
  2. JW

    JW Guest

    Nevermind...
     
    JW, Dec 5, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1995 Passport - Overheating after Timing belt tensioner change -- belts removal/installation

  2. Serpentine Belt Routing Diagrams

  3. Serpentine Belt 2003 CR-V

  4. Does the CRV (1999) have a tensioner/idler pulley on the timing belt?

  5. Serpentine belt

  6. 1991 Accord Balance Shafts Belt Tensioner

  7. How do I properly install timing belt, balancer belt on H22A Engine? Please Help

  8. Serpentine Belt replacement?

Loading...