OBD-II port on 2006 Accord?

Discussion in 'Accord' started by Unquestionably Confused, Dec 16, 2006.

  1. Where might it be. Looked through the owner's manual. No help.

    Shined flash beneath dash on driver's side still nothing found.

    Am I even close?<g>

    Car's out in the dark on the driveway so now I get to thinking that
    MAYBE it's behind the cover for the fuse block on the driver's kick panel.

    Anyone have the answer?

    Thanks
     
    Unquestionably Confused, Dec 16, 2006
    #1
  2. The prescribed location is below the dash on the left side, located so that
    it is readily visible. If the connector is not there a placard is supposed
    to be there to say where the connector is.

    Mike
     
    Michael Pardee, Dec 16, 2006
    #2
  3. Unquestionably Confused

    motsco_ Guest

    ==================================

    Look at the PDI dsheets for the previous models of accord . . . I'm sure
    yours is similar:
    http://www.tegger.com/hondafaq/tsb/accord/index.html#accord

    'Curly'
     
    motsco_, Dec 16, 2006
    #3
  4. Unquestionably Confused

    Andy & Carol Guest

    It is behind my (ash) tray in the center of the dash
    in my Accord 1996..But that was some years back!
     
    Andy & Carol, Dec 16, 2006
    #4
  5. Found it! Sits all the way to the left, near the driver's side kick
    panel. Socket is mounted facing downward and parallel to the kick
    panel. Sits in plain view if you're less than 13" tall or standing on
    your head<g>

    Thanks all!
     
    Unquestionably Confused, Dec 17, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.