Neret Part: CR-V Sunglass Holder

Discussion in 'CR-V' started by alex, Jun 17, 2009.

  1. alex

    alex Guest

    Actually, I just need a little black cog which prevents the sunglass
    holder from dropping fast. It is connected to the starboard side of
    the Sunglass/Maplight Assembly.

    The cog is about 1/4" ~ 3/8" in diameter and is just mounted on a post
    with enough friction to make it rotate slow. It clips into the assy.

    I spoke to my local Honda dealer and he says that I have to buy the
    entire assy.

    Anyone have a source for this small part?

    -Alex

     
    alex, Jun 17, 2009
    #1
  2. alex

    DJD58 Guest

    Junkyard.

    Dan D
    '07 Ody EX
    Central NJ USA
     
    DJD58, Jun 17, 2009
    #2
  3. alex

    E. Meyer Guest

    Don't know what year your CR-V is, but as of the '06 model year (the year of
    my CR-V) there were only two different models of the sunglass holder & they
    have interchangeable parts. You can also use the ones with the built in
    homelink if you want.

    I upgraded mine on ebay for $20 to get the homelink, but for your purposes,
    you should be able to get the part you need from virtually any Honda you
    find in the junkyard that has a sunglass holder.

    Now if your CR-V is '07 or newer, YMMV, but I would still start at the
    junkyard.
     
    E. Meyer, Jun 17, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.