keyless remote control honda jazz.2002

Discussion in 'Jazz' started by zippy007, Mar 17, 2014.

  1. zippy007

    zippy007 New Member

    Joined:
    Sep 21, 2013
    Messages:
    4
    Likes Received:
    0
    my only remote has failed.and have now got a aftermarket keyless remote system to add to my already remote control unit. the only thing is that it is not very clear where to add the unlock/lock wires to my existing unit.the diagram tells you to cut the wires on the centre locking switch,and insert unlock wire to the motor side and the other wire to the switch.same with the unlocking pair..(and then add 12v to the switch as well.)(not done this part..it does not make sense).do not work.
    jazz wiring shows 12v either side of switch and a common wire in the middle.so when you switch between the 2 you lock or unlock the doors., any help or pinpoint it the correct area to make it work.thanks
     
    zippy007, Mar 17, 2014
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.