how to put on springs,shocks,and camber kit

Discussion in 'General Motoring' started by kyle lallave, Nov 16, 2004.

  1. kyle lallave

    kyle lallave Guest

    hey i just got some eibach sport line springs, KYB AGX shocks, and skunk2
    camber kits....how do i install all of this?!?! ik i need a spring
    compressor and all but not exactly 100% sure on how to do it all
     
    kyle lallave, Nov 16, 2004
    #1
  2. kyle lallave

    Chopface Guest

    I could help you if you start by doing some of your own research. Then
    you can ask more specific questions. I'm not going to type out the whole
    procedure for you. I recently changed the dampers and springs on my
    Civic. A piece of advice I'd give you now though is to bring the new
    springs with you when you buy/borrow the compressor. Some are too bulky
    for the tightly wound springs. Also, people may give you more specific
    tips if you state the year and model of the car.

    Mark
     
    Chopface, Nov 17, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Mechanic put 10-30 oil in 2002 CR-V and camber deviation

  2. FS: skunk2 coils and camber kit.

  3. Is there a difference between '88 and '89 CRX Shocks and springs?

  4. how to put on springs/shocks/camber kit

  5. Transmission Kits and Transfer Case Kit / Hard and Soft Parts

  6. how to put on sprigns,shocks, and camber kit

  7. Camber Kit or Bending?

  8. Question about 94 Acura Integra shocks and springs

Loading...