Honda Power Steering Pump

Discussion in 'General Motoring' started by Wanderer!, Aug 7, 2003.

  1. Wanderer!

    Wanderer! Guest

    Hello

    Recently I had to open one of the metallic hoses in the power steering
    pump in my honda accord 92 (132K). Lot of fluid leaked out. I topped
    the system with honda power steering fluid from PEP Boys. The fluid
    box said that the fluid is for a Honda, it matches all the honda
    specifications but its not endorsed by Honda. My Questions are

    1. Should I bleed the whole system and fill it with OEM Honda Fluid?
    2. In the pump, I found two hoses. One mettalic hose going somewhere,
    I do not know where :(. Another rubber hose came from the pump and
    went to the reservoir. In the reservoir, there were two hoses which
    were going out of the reservoir to the lower part of the car.
    Which of the hoses should I remove for bleeding and from where?

    Do I need to go under the car to do this job?


    Thanks and Regards
    Prashant
     
    Wanderer!, Aug 7, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.