HONDA PILOT BLOWER MOTOR RESISTOR LOCATION

Discussion in 'Pilot' started by ckeagy, Oct 31, 2005.

  1. ckeagy

    ckeagy Guest

    I am trying to locate the blower motor resistor to fix my 03 Pilot. I turn
    on the A/C and the rear works, but nothing comes out in the front. I was
    told to check the blower motor resistor first - but cannot find out where
    it is.....
     
    ckeagy, Oct 31, 2005
    #1

  2. ----------------------------------

    Don't SHOUT, it's very doubtful you HAVE a resistor pack in an 03 Pilot.
    IF you turn the blower speed all the way to MAX (listen for click) and
    still get nothing, you need to consult your owner's manual for the fuse
    locations.

    If you have (had) a continuously variable fan speed (like the CR-V)
    there's a 'speed transistor' mounted into the heater body right behind
    the glove box. Remove the retainer clips, lower the box, and you'll
    probably be looking right at it, or at least at the connector and screws
    that mount it inside the blower. Unplug the blower motor and remove
    three screws, blower falls on floor (if the same as CR-V).

    Why not sign in, and SEARCH the Pilot forums at
    http://www.hondasuv.com/stg/index.php?c=3

    'Curly'
     
    'Curly Q. Links', Nov 2, 2005
    #2
  3. ckeagy

    ckeagy Guest

    I can hear the motor running - but no air comes out at all -
     
    ckeagy, Nov 2, 2005
    #3
  4. ckeagy

    ckeagy Guest

    what do I do then? will this need to be replaced? lost .....
     
    ckeagy, Nov 3, 2005
    #4
  5. =======================

    Find a quiet place, and turn the key to position II. With the fan OFF,
    try setting your controls to FLOOR, WINDSHIELD, VENTS. Listen and see if
    it's opening and closing the various flaps that divert the air where it
    should go. Try it with the fan on the lowest setting as well.

    If the flaps aren't moving, check your fuses, according to your Owner's
    Manual. You need to be able to explain what's really going on if you're
    going to explain it to the dealer.

    'Curly'
     
    'Curly Q. Links', Nov 3, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.