Honda Accord EX 1992 Brake Calipers US vs. Japan version interchangable?

Discussion in 'Accord' started by Mark, Jul 11, 2006.

  1. Mark

    Mark Guest

    I have a 1992 Honda Accord EX made in USA with a VIN code starting with
    1HG. I need to replace the front brake calipers. The PEP boys store
    lists two types, one for use with VIN code 1HG USA (like mine) and the
    other for VIN code JHM made in Japan. So obviously I asked for the USA
    version. Problem is these calipers are not the same as the ones on my
    car. The new USA version calipers have pins that are long bolts that
    thread directly into the caliper ears. The calipers on my car have
    pins that have a slot and a small bolt threads into the the pin. I
    assume somehow my car has the Japan version calipers even though it was
    made in the US.

    Is this correct? Is that (the caliper pin construction) what is the
    difference between the two versions? Is that the only difference?

    And the new calipers do not come with caliper brackets, so I need to
    use the existing caliper brackets that are already on the car.

    So which version caliper should I get USA or Japan?

    Are the two versions of calipers interchangable with the caliper
    brackets on my car?

    Also are the brake pads the same for the two versions of calipers?

    And a final question, the new calipers come with two copper washers for
    each side for the hydrolic banjo fitting but I'm pretty sure there is
    only one copper washer on my existing fittings. What is the proper
    usage of the copper washers on the banjo fittings? Two one each or only
    one?

    thanks
    Mark
     
    Mark, Jul 11, 2006
    #1
  2. Mark

    John Horner Guest

    Banjo fittings normally have copper washers on both sides of the
    fitting, not just one.

    John
     
    John Horner, Jul 12, 2006
    #2
  3. Mark

    Ross Guest

    get the version that is the same style you are removing. Because there are two listings
    indicates there are differences - how many, of what sort, hardly matters to us laymen.
    You willl also need to include the original for core exchange and would expect they would have
    to be the same type as those you are purchasing.
    not likely
    I believe so.
    the copper washers are used to create a proper seal - one is required on each side to ensure
    this.
     
    Ross, Jul 17, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.