glove box removal

Discussion in 'General Motoring' started by stevef, Jul 12, 2004.

  1. stevef

    stevef Guest

    I need to replace the ac filters (interior) and I believe I need to remove
    glove box to get to them. Is this correct?

    I am having a problem removing the glove box. I removed the two Phillips
    screws on each side, as well as the two Phillips at top center of glove box
    inside. The glove box still will not come out. Also removed the fuse cover
    on passenger side but it doesn't appear to give access to glove box, just

    Any suggestions would be appreciated.


    99 Accord 4 cyl
    4 door
    63000 miles

    remove '1' in '741' to email
    stevef, Jul 12, 2004
  2. Here's the best indpendent diags and description I've seen: and when I did mine I'm
    sure there were more screws than shown there which I had to remove... a 2nd
    metal bar with 3 screws?? It does show the tricky ones though. Getting
    the glovebox out and especially putting it back is also an exercise in how
    much faith you have in plastics engineering - how hard to heave and shove
    with the confidence that nothing will break.

    Rgds, George Macdonald

    "Just because they're paranoid doesn't mean you're not psychotic" - Who, me??
    George Macdonald, Jul 13, 2004
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.