getting started

Discussion in 'General Motoring' started by yatabata, Jan 31, 2007.

  1. yatabata

    yatabata Guest

    Hi all, Been awhile since I have worked on a overhead cam/head rebuild
    but went to start today and sounds like the valves are hitting the
    pistons so turned off the engine real quick and went back in the house
    to re-read the book on hondas. It is a 89 accord with a carb not fuel
    injection. I think I have the crank 360 out so just need to take the
    timing belt back off and rotate the timing TDC around another turn and
    put the belt back on to solve the tapping problem. If this is the
    problem let me know thanks.
     
    yatabata, Jan 31, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Slugigsh/ Hard Gear Shift Selector CRV 2002 - Just started ???????

  2. battery, started, or alternator!

  3. 1995 Civic-Started using oil

  4. Honda Odyssey: 1 second noise at 5 mph when started (started engine as well).

  5. thin can noise when motor is started (Honda Civic Dx 98)

  6. 91 accord, started then died a few minutes later, no spark

  7. Started up engine, horns/panic triggered (Odyssey '06)

  8. Problem with a 1992 Honda Accord staying started

Loading...