Fuel Antifreeze additives

What's the lowdown on products like Heet? I have a nearly new '06 Civic
(about 11k on it) and we're heading into some fairly bitter cold here
in Chicago. I used to use Heet regularly in my GM products. Any reason
why I shouldn't now?

Thx.

 

Most gasolines already have additives in them that prevent freezing. In
particular, if your gasoline has ethanol in it (like 10% ethanol), then
you definitely don't need it. The ethanol itself is a gasoline antifreeze.

But wait! Don't take my word for it. Take the words of two nuts with
degrees from MIT:

http://cartalk.com/content/columns/Archive/2003/March/02.html

Jeff

 

Hi,
If the gas is winter blend. Alcohol absorbs moisture. Nothing special.

 

Last I was at a Sunoco station (in the summer, no less), there was a
sign on the pump that it contains 1/10 ethanol. The winter blends
usually are oxygenated fuels. The oxygen parts means that there are
ethers and alcohols and other molecules that absorb water well.

Of course, usually fuels don't freeze in the summer.

Jeff

 

Hi,
I don't let fuel level go too low in the winter. Condensation can cause
water in the tank when it is too close to empty. I live in Alberta where
temp. can go as low as -35F or even lower with wind chill of like -50F.
Battery in bad shape can have slush inside when car is parked outside.

 

Wind chill doesn't affect your gas.

As for additives, your basic methyl hydrate is all I ever used (BC
Interior, similar climate to much of Alberta)... but yeah, gas in these
climates is generally sold with any necessary seasonal additives already
blended in.

 

Yet winter air has very little water vapor in it. So, unless the car or
truck spends lots of time indoor (e.g., in a garage), I don't think this
makes too much difference.

None the less, this is a good idea.

 

Once you hit about -20C or so, you can see the ice crystals floating by
from the moisture in the air freezing