crv body cladding

Discussion in 'CR-V' started by karenfirnbac, Aug 7, 2006.

  1. karenfirnbac

    karenfirnbac Guest

    i recently bought a 2002 crv from someone that i work with, he took very good
    care of the car. Has only 43,000 miles and when he purchased the car in 02'
    he spent another $600 for body cladding. This comes in 6 panels and is sold
    as a set, so the pieces are applied front, middle, rear on both side of the
    car. Anyway, he was the only one that drove the car and never really used the
    back seats for other passengers so those doors were not opened. Now that i
    own the car and have a family were in and out of the back.

    I 'mhaving trouble with the cladding on both doors that open to the back seat,
    it catches on the front door and is lifting off and tearing.

    Has anyone else had this problem??? i spent $100 to fix the one side but now
    the other side is lifting up from the surface because its catching on the
    front door. I spoke to the Manager at Honda and he remember my first
    incedent. so i explained to him this is happening on the other side. His
    answer to me was "can you open the front door first, then the rear door".
    The point is i shouldnt have to do this and its looks ugly because its
    ripping and with our winters the weather will really takes its toll.

    Any suggestions or has anyone else had this problem?????

    karen
     
    karenfirnbac, Aug 7, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.