Civic rear lower control arms

Discussion in 'Civic' started by Dave, Apr 4, 2004.

  1. Dave

    Dave Guest

    I have an '88 Civic. The service manual doesn't mention any special
    techniques for pressing new bushings into the rear lower control arms.
    The arms are different from those on the '89-91 Civics in that they're
    formed from sheet metal not cast iron like on the later models. I'm
    concerned about collapsing the arms during the press operations. I've
    checked the AllData database at my local library but didn't find any
    specific information pertaining to the rear lower control arms.

    Does anyone have any experience replacing these bushings or know of a source
    for information?

    Thanks, Dave
     
    Dave, Apr 4, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Rear Control Arms-87 prelude si

  2. 90 Accord/Replacing Front Upper Control Arms

  3. length of lower control arms

  4. '91 Accord Upper Control Arms

  5. 91 Civic front control arms

  6. Help! Bent control arms? I think the bodyshop is trying to rip me off...

  7. Used or New -rear control arms? 1987 Accord.

Loading...