Civic motor swap

  • Thread starter Thread starter David Boron
  • Start date Start date
D

David Boron

I would like to know if a ZC Japanese Domestic motor will bolt onto a stock
United States Domestic 1989 Civic DX tranny. Also how significant is the
wiring harness change that is necessary to utilize the MPFI on the ZC motor?
Email me direct or better yet post reply in group. Thank you in advance.
 
Should bolt up. You need more than just a wiring harness change, you need a
computer from a civic Si or EX or first generation Integra. You won't like
the gearing of the DX tranny though. The swap is easier if you have an EX
or Si to start with.

Go to yahoo and search for ZC DX swap, and you'll find lots of info.
 
ah yes the ECU from an Integra I think is the answer, correct? (but I'm not
sure of this also) I kick myself all the time for not just getting the Si in
the first place...it's just that I recently replaced the clutch with a nice
ACT so like to use it if I can. Thank you for the advice. I'm just wanting
to do a nice clean swap for as few clam as possible, as this is my
transportation to a from work.
 
You must log in or register to reply here.

Latest threads

Back
Top