Brake lights on 98 Honda Civic not working

Discussion in 'Civic' started by syclone98, Apr 4, 2008.

  1. syclone98

    syclone98 Guest

    I recently bought a 1998 Honda Civic DX and discovered that my brake
    lights are not working.

    I began troubleshooting the problem by first replacing the brake light
    switch (under the brake pedal) which didn't help and then replaced the
    third brake light bulb (which was burnt out) but that didn't help
    either.

    I then started looking at the brake light bulbs and discovered
    something a little odd. The actual brake light bulb has two filaments
    in it - the first is for the running lights and the second gets
    illuminated when the brake pedal is pressed. What's happening with my
    car is that if the headlights are on, both filaments are lit for some
    unknown reason. I should add that the turn signals still work so I
    know that there is power in the circuit.

    Any ideas or suggestions on where I should look to fix the problem?

    Thanks in advance,
    Christopher
     
    syclone98, Apr 4, 2008
    #1
  2. syclone98

    Rick Blaine Guest

    Maybe the wrong kind of bulbs are installed?
     
    Rick Blaine, Apr 4, 2008
    #2
  3. syclone98

    Seth Guest

    See my response in and learn how to cross-post rather
    than multi-post.
     
    Seth, Apr 4, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.