Backseat driverside lock release strap problem

Discussion in 'General Motoring' started by aacharmed, Jan 5, 2007.

  1. aacharmed

    aacharmed Guest

    Wailing female with backseat fold up problem.
    * The problem: the lock release strap on the backseat on the
    driver’s side won’t release the seat so that it can be lifted and
    folded up.
    * What I did: From its original passenger position, while seated I
    moved the slide bar under the seat so that the seat was pushed as far
    back as it allowed. It seemed to lock.
    * I folded the seat back down upon its cushion (the headrest removed).

    * I lifted the lock release strap and although it seemed to behave
    like the other lock release on the passenger side, it failed to
    function. It didn’t unlock the seat so that it could be folded up.

    * I should mention that the seat was originally in the fold up
    position.
    * My original intent was to lift the whole seat out. I saw the
    sliding bar near the bottom of the folded up seat and tried moving it
    thinking that it would release the seat and allow me to remove it. I
    was not aggressive and hardly messed with it. I didn’t recognize the
    bar as the seat slide bar for adjusting the seat backwards/forward.
    It was then that I tried what I stated above. 2003 CRV w/30,000
    miles rare use of passenger seat in any position.
    Thanking you in advance.
     
    aacharmed, Jan 5, 2007
    #1
  2. aacharmed

    motsco_ Guest

    ===========================================

    Try these links and see if its covered by a TSB:

    http://www.tegger.com/hondafaq/tsb/crv/index.html

    Os sign in and SEARCH at www.hondasuv.com

    'Curly'
     
    motsco_, Jan 5, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.