advice requested from 2008 or new CR-V owners

Discussion in 'CR-V' started by Guy, Mar 9, 2010.

  1. Guy

    Guy Guest

    Just want to learn from your experiences or advice if you own a 2008
    or newer CR-V. I have a 2010 CR-V LX with no roof rack.

    How do you secure a protruding ladder, lumber or such from inside your
    vehicle? I know the back door shuts down so how do you protect it's
    bottom from slamming on the protruding item too? Any other
    suggestions what works best when moving these type things. Thanks.
     
    Guy, Mar 9, 2010
    #1
  2. Guy

    M.M. Guest

    I use my truck instead of my CR-V.
     
    M.M., Mar 9, 2010
    #2
  3. Guy

    M.M. Guest

    I use my truck instead of my CR-V.
     
    M.M., Mar 9, 2010
    #3
  4. Guy

    E. Meyer Guest

    On the '06 CRV, the back window opens in the tailgate. That's the way of
    choice for long things like ladders. Don't know if it still opens on the
    '08 or not.

    The other thing that works in the '06 is to lay down the front and rear
    right seat backs and slide the ladder all the way forward to the dash.
    Usually you can close the tailgate then if whatever it is is 8 feet or less.
     
    E. Meyer, Mar 9, 2010
    #4
  5. Guy

    E. Meyer Guest

    On the '06 CRV, the back window opens in the tailgate. That's the way of
    choice for long things like ladders. Don't know if it still opens on the
    '08 or not.

    The other thing that works in the '06 is to lay down the front and rear
    right seat backs and slide the ladder all the way forward to the dash.
    Usually you can close the tailgate then if whatever it is is 8 feet or less.
     
    E. Meyer, Mar 9, 2010
    #5
  6. Guy

    M.M. Guest

    On the 08 the window does not open.
     
    M.M., Mar 9, 2010
    #6
  7. Guy

    M.M. Guest

    On the 08 the window does not open.
     
    M.M., Mar 9, 2010
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.