99 Accord lx timing belt change

Discussion in 'Accord' started by Nick, Nov 24, 2005.

  1. Nick

    Nick Guest

    Hello everyone,

    One thing that I have chosen not to do as I have heard people
    really messing this up is the timing belt. On my mother's car while
    she didn't have the mileage (currently 46k), the years were there so I
    had to get the timing belt changed. Now that I got the car back, I
    noticed that antifreeze is leaking close to the lower hose. I'm going
    to jack the car up tomorrow and see if it is cracked or the clamp
    isn't secure as it's raining today.
    I took a look at the Haynes manual to see if the radiator is
    required to be removed for the timing belt (I recall that in older
    models this to be the case) but can't seem to find it for this model
    year. Does anyone think that they could have screwed this up at the
    dealer?

    Thanks,
    Nick
     
    Nick, Nov 24, 2005
    #1
  2. ------------------------------

    If it's leaking from the timing belt cover, at the bottom, they've
    forgotten to torque up the new water pump (you didn't say if it was
    replaced) or your pump is just leaking. That would be super-ironic,
    since you have to remove the timing belt to change the pump :-(

    You don't have to disconnect the rad hose, as far as i can remember.

    'Curly'
     
    'Curly Q. Links', Nov 25, 2005
    #2
  3. Nick

    Nick Guest

    Thanks for the help, yes the pump was also changed but the leak
    appears to be coming from near the lower radiator hose (at least from
    what I could see) on the left side and the timing belt I believe is on
    the right side. I'll take a look at it in the morning.

    Thanks,

    Nick
     
    Nick, Nov 25, 2005
    #3
  4. Nick

    Elle Guest

    I have only one timing belt job under my belt, but the only thing I can
    imagine is that if the 99 Accord requires the oil pan to be supported during
    the job, then the support may have slipped or not been properly placed.

    On my 91 Civic, one of the motor mounts has to be removed for TB jobs.
    Before removing the TB, I support the oil pan with a jack and a 1 foot
    square piece of plywood, per the manual's directions.

    Some shop did a TB change on my Civic many years ago and did not properly
    support it. This dented the car's oil pan considerably.

    Look for dents in the vicinity of the oil pan and where the hose is leaking.

    Of course, it could be a lot of things that caused the leak.
     
    Elle, Nov 25, 2005
    #4
  5. Nick

    Nick Guest

    I had a look at it this morning. It looks like the dealership didn't
    place one of the hoses all the way in. Once I did it, that took care
    of the problem. Luckily the radiator wasn't damaged :)

    Thanks for everyone's input.

    Nick
     
    Nick, Nov 25, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.