97 Civic LX Keyless entry

Discussion in 'Civic' started by coastie33, Feb 18, 2005.

  1. coastie33

    coastie33 Guest

    My keyless entry started acting up, I called the dealer and they told
    me about the reset button on the face of the factory radio. Previous
    owners had a new radio installed and the installers pushed the OEm
    radio down inside after removing the faceplate(no reset button). I
    bought another radio, installed the security module and the system
    acted like before until I pressed the reset button. All seemed normal
    but now the remote does nothing. I checked the batteries on both
    remotes, resync’d the remote but still nothing. I disconnected the
    battery, I reset the radio again (I can hear the door locks activate
    when I do that) but still nothing.
    Any ideas??
     
    coastie33, Feb 18, 2005
    #1
  2. coastie33

    Randolph Guest


    The keyless entry receiver has to be programed to respond to the code
    transmitted by your remote. The replacement receiver you bought would
    not be programmed to your key fob, thus the keyless entry does not
    work. You can find the procedure for reprogramming the receiver at
    http://www.geocities.com/ng_randolph/index.htm
     
    Randolph, Feb 18, 2005
    #2
  3. coastie33

    coastie33 Guest

    Thanks for the info, however the programming steps still did not solve
    my dilemma.
     
    coastie33, Feb 18, 2005
    #3
  4. coastie33

    Christopher Guest

    Apparently, installing an aftermarket radio on a 96 - 98 Civic causes
    problems not only with keyless entry but with the dome light as well.

    Does this help you at all?

    http://www.streetdreams.com/tech/honda/civic9698.html
     
    Christopher, Feb 22, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.