95' Civic Rocker Arm Assembly torque specification

Discussion in 'Civic' started by John, Feb 10, 2004.

  1. John

    John Guest

    What should the torque specification be set for a 95' honda civic v-tec sohc
    rocker arm assembly

    JOhn
     
    John, Feb 10, 2004
    #1
  2. John

    Randolph Guest

    For the D16Z6 engine the torque for the bolts holding the rocker arm
    assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
    in which to tighten the bolts. I'll send you a scan of the service
    manual to the "from" address from you post. If it is a decoy e-mail
    address, post your real one and I'll send the scan there.
     
    Randolph, Feb 10, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Tie rod end arm & steering arm distance?

  2. Torque on civic lower rear arm bolts?

  3. Help with Rocker Arm bolts torque settings!

  4. 1988 Honda Civic LX drivers side trun light assembly

  5. 2005 Accord EX V6 16" Alloy Wheel-Lug Nut Torque Specification

  6. 1994 Accord Rocker removal

Loading...