'92 Accord EX Cat Converter Replacement Questions

Discussion in 'Accord' started by Zorro_2K, Nov 9, 2003.

  1. Zorro_2K

    Zorro_2K Guest

    1) Seems there are two types of catalytic converters for the 92 Accord EX.
    How does one tell which aftermarket converter to buy as a replacement ?
    Suggestions welcome.

    2) Can the catalytic converter be replaced without completely dismantling
    the exhaust sytem. It is bolt-in, and there appears to be a flexible mesh
    cover over the solid segment of exhaust pipe on the engine side ahead of the
    cat. But it looks like the post-catalytic segment needs to be lossened to
    install the cat.
     
    Zorro_2K, Nov 9, 2003
    #1
  2. Zorro_2K

    N.E.Ohio Bob Guest

    Turned into a big job on my '92 LX Accord. The mesh covered thing is a
    flex section. It allows the side to side mounted engine to move relative
    to the front to back mounted exhaust.
    The cat converter on my car was hard to remove. The muffler man had to
    burn off all the bolts. He had an after market one that was an exact
    replacement. bob
     
    N.E.Ohio Bob, Nov 9, 2003
    #2
  3. Zorro_2K

    N.E.Ohio Bob Guest

    Turned into a big job on my '92 LX Accord. The mesh covered thing is a
    flex section. It allows the side to side mounted engine to move relative
    to the front to back mounted exhaust.
    The cat converter on my car was hard to remove. The muffler man had to
    burn off all the bolts. He had an after market one that was an exact
    replacement. bob
     
    N.E.Ohio Bob, Nov 9, 2003
    #3
  4. I advise you to take it to a mechanic that you trust or a mechanic in your
    town that has a good reputation. Allow him to do the work and make the
    choice on a proper replacement. Don't try to do the work yourself. The job
    will be much easier for a mechanic since they can place the vehicle on a
    lift--that's a lot easier than crawling under your car and trying to do
    the work.
     
    Bill B. Johnson, Nov 11, 2003
    #4
  5. I advise you to take it to a mechanic that you trust or a mechanic in your
    town that has a good reputation. Allow him to do the work and make the
    choice on a proper replacement. Don't try to do the work yourself. The job
    will be much easier for a mechanic since they can place the vehicle on a
    lift--that's a lot easier than crawling under your car and trying to do
    the work.
     
    Bill B. Johnson, Nov 11, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.