91 Prelude Cylinder Position Indicator Sensor question (aka TDC sensor)

Discussion in 'Prelude' started by san luis, May 31, 2005.

  1. san luis

    san luis Guest

    I took my engine apart to replace all the stuff
    that was destroyed on a timing belt break. I have
    2 manuals Chittlins (chilton) and Haynes. Neither
    addresses installation of "Cylinder Position
    Indicator" which rotates with the exhaust cam
    (B20A5 engine DOHC). I did a continuity check and
    rotated the sensor. Every 360 there is a bump and
    change in resistance.

    Does it matter how it goes back in other than the
    rotation tabs matched to the end of the camshaft?

    TIA
     
    san luis, May 31, 2005
    #1
  2. san luis

    chip Guest

    the tabs only line up one way just like a distributer.
     
    chip, Jun 1, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. problem with a 2003 honda (crankshaft position sensor)

  2. tdc sensor issue in 1989 Honda Civic DX (Sedan Model) 1.5 litre.

  3. follow up to my 1989 Honda Civic DX Sedan TDC Sensor/ECU Problem.

  4. left indicator lamp flashing faster than right indicator

  5. 91 Prelude Cylinder Position Indicator Sensor question

  6. how does a pushrod to a brake's master cylinder change position?

  7. 09 Honda Fit floor mat anchors (aka floor mat clips)

  8. 89 Civic "TDC Position" problem (car will not start)

Loading...