91 Honda Accord - Leaking Wiper Fluid

Discussion in 'Accord' started by David Macaskill, Feb 12, 2005.

  1. I've got a leak in my wiper fluid line. I filled the tank with water,
    ran the car, and activated the pump. Water made it to the windscreen
    but also gushed out from underneath the car just in front of the
    driver's door. I had the hood up for all of this and there was no
    obvious leak. Problem is the line is mostly hidden in the body (I
    think). Is there an easy way to expose the line and troubleshoot this
    problem. Thanks in advance. DEM.
     
    David Macaskill, Feb 12, 2005
    #1
  2. David Macaskill

    TeGGer® Guest

    (David Macaskill) wrote in
    Remove left front wheel. Remove mudguard. Remove plastic splash guard from
    wheel well.

    You will now be able to see the hose attached to the inside of the fender
    and should be able to see where the leak is.

    The plastic clips holding the liner on are finicky to remove. Your best bet
    is to get TWO very skinny screwdrivers, and pry with them 180deg apart to
    wiggle the pin out of the center of the clip. Once that's done, the clip
    will pop out easily. DO NOT just haul on the clip with the pin in place. It
    will NOT come out.

    Check carefully. If the liner won't budge, there's still a clip in there.
    You should only have to remove the rear-most clips, enough to bend the
    slpash guard away from the fender.

    The center pins will have a Phillips cross in them. Don't even bother with
    that.
     
    TeGGer®, Feb 14, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.