2005 CR-V Front Brake Pad Replacement

Discussion in 'CR-V' started by Zorro_2k, Sep 11, 2010.

  1. Zorro_2k

    Zorro_2k Guest

    I replaced the front brake pads on my son's 2005 CR-V, and those
    little spring clips that span the inner and outer pads gave me a FIT.
    Is there a detailed process on how to deal with these little
    buggers...it added an extra half hour per side to get them and their
    pads in place.
     
    Zorro_2k, Sep 11, 2010
    #1
  2. Zorro_2k

    H. Ford Guest

    I'm not familiar with the specifics of the CRV, but all of the pads I
    have replaced on other vehicles and other Honda models did not require
    removing the springs. A common caliper configuration requires that one
    bolt be removed to allow the caliper to be swung away from the brake
    pads. The pads are then pulled away from the rotor and out of the
    spring retainer. The new pads are then slipped into the spring retainer
    and caliper reinstalled.
     
    H. Ford, Sep 12, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '92 accord brake pad replacement

  2. brake service 98 isuzu rodeo 2WD. Do I have to re-surface the rotor for replacing the brake pad.

  3. Pilot Brake Pad replacement

  4. Front Brke pad wear indicator Oddysey '99

  5. brake pad replacement

  6. 87 Accord DX Hatchback Front Brake Pad Replacement

  7. front bake pad shims 91' acura integra ?

  8. 99 accord ex brake scrub sound after pad replacement

Loading...