2000 Accord Valve Knock Sensor

Discussion in 'Accord' started by Cheech, May 4, 2011.

  1. Cheech

    Cheech Guest

    my CEL light is on after doing an engine swap. I ran the OBD scanner
    and the code for Valve Knock Sensor came up. I wanted to know where it
    is located and if it is easy to get to and check out on the engine?

    I'm thinking it may not have been connected since I just did an engine
    swap, unfortunately the mechanic who did it is not in town and the
    emissions test is due before he gets back :(
     
    Cheech, May 4, 2011
    #1
  2. Cheech

    Tegger Guest



    It's not a "valve" knock sensor, just a knock sensor. It measures
    detonation inside the combustion chamber, and has nothing to do with the
    valves.

    Not sure exactly where the one is on your car, but they all screw into the
    side of the head, sometimes under the intake manifold. Check carefully, all
    around and underneath, for any single-wire electrical connector left
    unplugged.
     
    Tegger, May 4, 2011
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Where is the knock sensor on an '03 V-6 Accord?

  2. 200 Accord knock sensor location.

  3. 2000 Accord knock sensor troubleshooting

  4. b16 knock sensor infinite resistance

  5. 2003 accord ex v6 knock sensor

  6. Will a car with a knock sensor ping?

  7. 1992 Honda Accord EX 2.2 L pinging Does this car have knock sensor

  8. Knock sensor on Honda Accord 2005 and Honda Odyssey 2002

Loading...