1992 Prelude Steering Rack

I am changing out a steering rack in a customers Prelude, and in my haste to
return the core to him, I believe I left two bushings in the core that are
needed to mount the new one. It looks like they should be in the holes near
the steering wheel shaft coupling, but I really dont remember.

Can anyone verify if bushings were supposed to be there, and if so, where
can I procure replacements, as the core is long gone.

Thanks

Eightupman

 

Disregard.....they are supposed to be there, ,and NAPA has them....

 

The following shows two bushings at item 13 for a 1992 Prelude SI.
Would these be the ones you're looking for?

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputs
tate=5&catcgry1=Prelude&catcgry2=1992&catcgry3=2DR+SI&catcgry4=KA5MT&c
atcgry5=STEERING+COLUMN


If not, look under "P.S. Gearbox" etc. for your 92 Prelude via site
http://www.hondaautomotiveparts.com/auto/jsp/mws/catdisplay.jsp

 

Negative. I need the bushings that mount it UNDER the car. I know it
needs them because without then it will shift.