1991 Accord EX radiator loose on 1 side

Discussion in 'Accord' started by Robert Blank, Dec 22, 2003.

  1. Robert Blank

    Robert Blank Guest

    my radiator is loose on the driver's side (the bracket on the top that
    seems to hold it in place is allowing it to rattle). Is simply putting
    a new bracet the cure, or is this bracket adjustable?
     
    Robert Blank, Dec 22, 2003
    #1
  2. Robert Blank

    Jafir Elkurd Guest

    There should be a rubber bushing in that top bracket.

    http://tinyurl.com/3cwc5

    http://tinyurl.com/29gpc
     
    Jafir Elkurd, Dec 23, 2003
    #2
  3. Robert Blank

    Tegger® Guest

    And, even when both bushings are present, there *still* ought to be a bit
    of looseness when the engine is hot *and* when it is cold.

    If one end ever stops moving altogether, then it's being gripped too tight.

    --TeGGeR®
     
    Tegger®, Dec 23, 2003
    #3
  4. Robert Blank

    Tegger® Guest

    By the way, there ought to be bushings in both top brackets AND in both
    holes at the bottom.

    --TeGGeR®
     
    Tegger®, Dec 24, 2003
    #4
  5. Robert Blank

    Robert Blank Guest

    so, the side that does not move at all is too tight? But the side that
    moves more is too loose?
     
    Robert Blank, Dec 24, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Should you be able to move gear shift from side to side in gear?

  2. 1991 Honda Civic Leaning to the left side

  3. 1991 Honda DX Radiator Change out?

  4. Driver's side mirror loose . . . need help

  5. Accord 1991 can't open driver's side door

  6. Loose steering wheel material on 1991 Accord?

  7. 1991 Honda Accord Radiator fan runs when it rains - Help Please

  8. Sloppy shifter in 5 speed civic. Alot of side to side play when in gear. Bushings? guides?

Loading...