1990 Honda CRX....seat removal question...

Discussion in 'General Motoring' started by good4u, Aug 14, 2003.

  1. good4u

    good4u Guest

    Does anyone know the process of removing the seats from a 90 CRX? If
    possible, I would also like to know the exact ratchet size I will need
    etc...

    THANKS A BUNCH!:)
     
    good4u, Aug 14, 2003
    #1
  2. good4u

    Fluffy Guest

    Remove the two bolts in the front and the two in the back of the seat. Do
    not yank out the seat out until you've disconnected the wire under the seat
    that feeds the seatbelt warning system.

    I would use the 3/8" ratchet or the 1/2". The 1/4" would be too small and
    may not give you the needed torque to turn it.
     
    Fluffy, Aug 14, 2003
    #2
  3. good4u

    Rex B Guest

    |Remove the two bolts in the front and the two in the back of the seat. Do
    |not yank out the seat out until you've disconnected the wire under the seat
    |that feeds the seatbelt warning system.
    |
    |I would use the 3/8" ratchet or the 1/2". The 1/4" would be too small and
    |may not give you the needed torque to turn it.

    Very good. I'll bet he wanted the socket size


    ||> Does anyone know the process of removing the seats from a 90 CRX? If
    |> possible, I would also like to know the exact ratchet size I will need
    |> etc...
    |>
    |> THANKS A BUNCH!:)
    |
    |
     
    Rex B, Aug 14, 2003
    #3
  4. good4u

    SoCalMike Guest

    how hard is it to open the door, take out the socket set or wrenches, and
    match it up?

    or is this one of those people that buys their sockets one at a time, as
    needed, from sears?

    i think its a 13mm or 14mm, btw.
     
    SoCalMike, Aug 14, 2003
    #4
  5. good4u

    Matthew Hunt Guest

    On my Honda, I don't think I've come across a 13mm bolt head, but 14mm is
    common.
     
    Matthew Hunt, Aug 14, 2003
    #5
  6. good4u

    Rex B Guest

    On 14 Aug 2003 10:24:45 -0700, (good4u) wrote:

    |> how hard is it to open the door, take out the socket set or wrenches, and
    |> match it up?
    |>
    |> or is this one of those people that buys their sockets one at a time, as
    |> needed, from sears?
    |>
    |> i think its a 13mm or 14mm, btw.
    |
    |I was waiting for some retard to ask me WHY I wanted to know the
    |socket size, well I'm not too stupid to check it myself, and I would
    |if it was MY fuckin' CRX!!
    |
    |But I only wanted to know because a co-worker asked me if I had a
    |ratchet, I said YES, and asked what size he needed, he didn't know and
    |just told me it was to remove seats from a 1990 CRX...
    |
    |So THERE YA GO!

    LOL Hey, now, take it easy :)
     
    Rex B, Aug 14, 2003
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Rear Seat Removal - 94 Accord

  2. 2002 Accord back seat removal - how?

  3. 2005 Honday Odyssey Seat Removal?

  4. Accord seat heater removal

  5. 04 Accord taillight removal requires bumper removal?

  6. aftermarket seat for Element to seat 5?

  7. Honda Pilot 2005 LX Second Seat Removal Instructions

  8. 98 Accord Seat Heater Pad Removal

Loading...