03Accord V6 front mount

Discussion in 'Accord' started by Peter Kemp, Nov 19, 2008.

  1. Peter Kemp

    Peter Kemp Guest

    I need to replace the front engine mount (according to the dealer) and
    in looking at the Majestic Honda site, I see what looks like three
    parts to the mount:

    RUBBER ASSY., FR. ENGINE MOUNTING (AT)
    STOPPER, FR. ENGINE MOUNT (AT)
    RUBBER, FR. ENGINE MOUNTING HEAT INSULATOR

    Do I need to replace all three of these parts or just the Rubber Assy
    (the expensive part)?

    TIA for any help on this.
     
    Peter Kemp, Nov 19, 2008
    #1
  2. Peter Kemp

    Michael Pardee Guest

    Judging by the picture the second two parts are metal pieces. If so (you can
    look at the mount to be sure) you only need the $115 rubber part.

    Mike
     
    Michael Pardee, Nov 19, 2008
    #2
  3. Peter Kemp

    Tegger Guest



    Just the expensive part.
     
    Tegger, Nov 19, 2008
    #3
  4. Peter Kemp

    Peter Kemp Guest

    Micheal and Tegger -- Your help is much appreciated,. Thanks.
     
    Peter Kemp, Nov 23, 2008
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Can I mount the infant carseat in 91 Civic 3dr DX NOT in the center of the rear seat?

  2. Rear motor mount 1991 A/T

  3. Engine Mount

  4. 2001 Accord EX Front Motor Mount Changed ==>

  5. ABS Light Always On -03Accord 4cyl -EX

  6. Broken Front Engine Mount

  7. 98 Accord - front ball joints are bad before original front brake pads?

  8. 2001 Accord EX Front Motor Mount Change d==>

Loading...